Parat SMP parquetglue hybrid-glue
17Kg, only for finish-and mosaic parquet suitable
Processing conditions:
Best between + 18 -C and 23 -C; substrate temperature min. + 15 Air temperature min. + 18°C
Not above 65% rel. humidity
Recommended trowel notch:
Mosaic and two-layer finished parquet (8 mm thick, shorter 40 cm)
TKB tooth form B2 - Consumption: approx. 750 g/ml
Short two-layer ready-made parquet elements (up to 100 cm)
TKB tooth form B3-B5 - Consumption: approx. 1100 g/ml
Two-layer ready-made parquet in plank form (up to max. 120 cm)
Three-layer finished parquet in DIelenform (up to max. 250 cm)
TKB tooth form B5-B11 - Consumption: approx. 1250 g/ml
- solvent and silicone free
- Emicode ECIR - very low emission
- Substitute for parquet adhesives with high solvent content
- odorless
- good ribbing
- universal and safe in application
- ready for use - no mixing
- water-free
- elastic through-hardening - compensates for the swelling and shrinkage of the wood
- Impact sound improvement up to 14 dB, depending on the type of parquet
- Reduction of the room sound value by over SO %
Area of application: Solvent-free one-component adhesive for the elastic bonding of mosaic parquet, two-layer and three-layer ready-to-lay parquet according to DIN EN 13489 on absorbent and non-absorbent substrates, such as cement screed, calcium sulfate (flowing) screed and on substrates filled with suitable fillers.